该机是一种固定装置的垂直机械输送设备，主要是用于粮食、食品、饲料和化工等部门颗粒和粉状物料的垂直提升输送。
创盈 It is a kind of fixed vertical conveying equipment, mainly used in grain, food, feed, chemical engineering and other industries for vertical lifting & conveying of granular & powdery materials.
特点：
Characteristics:
1、驱动功率小,采用流入式喂料、诱导式卸料、大容量的料斗密集型布置.在物料提升时几乎无回料和挖料现象,因此无效功率少。
The driving power is small; flow-type feeding & induction-type discharge modes are adopted; large-capacity hoppers are set intensively. It is almost free of material return & excavation phenomena during material lifting, therefore, there is little reactive power.
2、专用模具压制多层咬边的加强筒体，强度高、密封性好。
Special mould is adopted to compact multi-layer undercut strengthened drum, and high strength and satisfactory sealing performance can be achieved.
3、提升范围广,这类提升机对物料的种类、特性要求少,不但能提升一般粉状、小颗粒状物料,而且可提升磨琢性较大的物料.密封性好,环境污染少。
创盈 It has a wide lifting range; less requirements for category and characteristics are proposed; it can lift general powdery & granular materials, as well as materials with relatively high milling performance. Satisfactory sealing performance and little environmental pollution can be guaranteed.
创盈 4、使用寿命长,提升机的喂料采取流入式,无需用斗挖料,材料之间很少发生挤压和碰撞现象。本机在设计时保证物料在喂料、卸料时少有撒落,减少了机械磨损。
It has a long service life. Flow-type feeding mode is adopted, and it is unnecessary to excavate materials with bucket; besides, there are little material squeezing and collision phenomena. The equipment is designed to ensure less material loss during feeding and discharging, and mechanical wear is reduced.
技术参数：
创盈
Technical parameters:
|
规格型号 创盈 Spec. & model |
畚斗规格 创盈 Spec. of winnowing pan |
传动比 创盈 Drive ratio |
畚斗带线速（m/s） Line speed of winnowing pan belt (m/s) |
创盈 产量（t/h） Output (t/h) |
||
|
粉料 创盈 Powdery materials |
粒料 创盈 Granular materials |
粉料 创盈 Powdery materials |
粒料 Granular materials |
|||
|
TDTG26/13 |
创盈 DQ1311 DS1311 |
9-23 |
0.8-1.2 |
1.2-2.2 |
创盈 1.2-2 |
6.5-9.5 |
|
创盈 TDTG26/18 |
DQ1814 DS1814 |
创盈 9-23 |
创盈 0.8-1.2 |
1.2-2.2 |
2-4.5 |
创盈 15-20 |
|
TDTG26/23 |
DQ2314 DS2314 |
9-23 |
0.8-1.2 |
1.2-2.2 |
5-8 |
16-25 |
|
创盈 TDTG36/13 |
创盈 DQ1311 DS1311 |
创盈 9-23 |
创盈 1.2-1.6 |
1.6-3 |
2-3 |
8-12 |
|
TDTG36/18 |
创盈 DQ1311 DS1311 |
9-23 |
创盈 1.2-1.6 |
1.6-3 |
4.5-6 |
创盈 16-17 |
|
创盈 TDTG36/23 |
创盈 DQ1311 DS1311 |
9-23 |
创盈 1.2-1.6 |
1.6-3 |
7-10 |
创盈 20-32 |
|
TDTG36/28 |
创盈 DQ2816 DS2816 |
创盈 9-23 |
1.2-1.6 |
1.6-3 |
创盈 8-11 |
25-40 |
|
TDTG40/18 |
创盈 DQ1814 DS1814 |
9-23 |
创盈 1.3-1.8 |
1.8-3.3 |
5-7 |
22-34 |
|
TDTG50/23 |
创盈 DQ2314 DS2314 |
11-29 |
创盈 1.3-1.8 |
创盈 1.7-3.4 |
8-12 |
30-50 |
|
创盈 TDTG50/28 |
DQ2816 DS2816 |
11-29 |
创盈 1.3-1.8 |
1.7-3.4 |
创盈 9-13 |
40-65 |
